positive and negative waterproofing

positive and negative waterproofing

Features

Made in Vietnam
Easy and fast way to waterproof walls, floors, balconies, roofs, tanks, ..v..v..
No harmful chemicals
Multiple-use
Consumption: 1 - 1,5 Kilograms / square meters
Type: Powder - Grey
Ready to use. Just add water (Or can be sprinkled dry)
Floor, wall, Reservoirs, Sewage and water treatment plants, underground vaults, Secondary containment structures, Foundations, Tunnels and subway systems, Swimming pools, Parking structures and roof decks

Advantages

Can be used for outdoor and indoor
Reverse waterproofing for indoor walls and ceilings
Wet or dry components can be used
With vertical grooves: can be sprinkled dry
C1B can automatically penetrate very deeply into the structure, filling deep cracks if any

How to use?

Spray water to clean dust and grease on the surface
Mix C1B with water according to the ratio indicated on the package for homogenization without lumps
Use a brush or roller. Large area can use sprayer
Apply 1st coat of paint. And wait for the 1st layer to dry completely. (Standby time is 3-4 hours depending on the outside temperature).
The 2nd coat is made perpendicular to the 1st coat

Curing:

C1B must be protected from rapid drying due to strong winds or hot weather by covering with wet burlap or by continuous spraying with water.

Safety and Precaution

Please check all specifications before use.
Keep out of reach of children.
Protective gloves must be worn.
C1B is cement base and is therefor alkaline. Suitable precautions should be taken to minimize direct contact with the skin

Packaging